Turbo Jet Waste Water
The TURBO-JET wastewater aerator, manufactured in various variants, offers versatility and flexibility, so that an effective solution can be offered for every wastewater treatment application, particularly in rural areas. Our waste water aeration system TURBO-JET is a handy device for aeration and circulation in the waste water sector. The unit is equipped with a submersible motor, i.e. it works below the water level. In this way, aerosol formation and running noises are largely avoided. In addition to the enormous circulation, the directly driven axial display wheel also ensures the desired fine to medium-bubble air-water mixture. This guarantees a good oxygen input and a large effective zone. By means of additional controls on the air intake system, the ventilation and circulation processes can be realised alternately as required.
In this way, nitrification and denitrification processes can also be achieved with little effort. Additional agitators are not required. In principle, we supply equipment that is completely ready for operation and therefore ready for immediate use. The assembly on site usually only includes the fastening by means of tensioning ropes and can usually be carried out without problems by the personnel of the sewage treatment plant.
The heart of the TURBO-JET wastewater aeration system is the aeration unit. The main component is the robust submersible motor (protection class IP 68). All materials have been selected for tough use in waste water and have proven themselves over many years. The motor pot is made of grey cast iron (GG 25) and is therefore robust and durable. Motor shaft, brackets and screw connections are made of stainless steel. The engine is sealed with a mechanical seal in an oil bath (vegetable engine oil).
The vacuum chamber is also made of grey cast iron. The propeller has been specially developed by us for „dirty water“ applications. The material used is a particularly hard bronze alloy (tungsten carbide bronze). This ensures long operating times. Wear and tear on the propeller is hardly noticeable even after several years of operation. The propeller shape was developed in such a way that no blockages or deposits are possible. The free passage in the propeller core ensures the addition of air. The dimensioning ensures trouble-free continuous operation.
The easiest way to use our ventilation system is in a floating version. We supply this waste water aerator completely ready for operation. Aeration aggregate and float form a compact, firmly connected unit. Practical carrying handles on the float allow two people to carry and insert the unit without lifting gear or the like. The devices are relatively light and easy to handle. The float is made of PE plastic as a hollow body and is very robust. The foaming of the cavities known from GFK floats is not necessary with our high-quality floats!
TURBO-JET floating can be optimally used for expansion or retrofitting – but also for original equipment. The floating unit only has to be placed on the waste water, pulled to the desired position with the aid of stainless steel wire ropes and attached to the edge.
Then all you need is a connection to the power supply! It couldn‘t be simpler – or faster or cheaper. Consider the cost savings by omitting the installation (electricity connection excluded).
- flexible and versatile
- minimum energy consumption
- good oxygen input
- large circulation
- low acquisition costs – fast amortisation
- low maintenance costs
- no installation
- no laying of air ducts
- no construction work
- absolutely winterproof
- immediately usable
- almost noiseless